Motorola solutions PMLN8305, Installation And User Manual

Page: 10 / 255

Chapter 2
Installation Procedures
This section provides the Vehicular Cradle Installation cautions.
CAUTION:
• An air bag inflates with great force. Do not place objects, including communications
equipment, in the area over the air bag or in the air bag deployment area. If the
communication equipment is improperly installed and the air bag inflates, this could cause
serious injury. If necessary, contact the vehicle manufacturer for air bag information specific
to the vehicle.
• Verify that none of the vehicle systems are affected by use of the MXP600 radio such
as cruise control, anti-lock braking system (ABS), traction control, engine management,
direction indicators, lights, and others.
• Use existing openings through the bulkhead to avoid drilling. If drilling is a must, verify that
no damage is done to the Vehicle Electronic Control Modules (ECM), fuel pipes, brake
pipes, and/or cable looms.
2.1
Vehicular Cradle Installation
This section provides installation procedures for Vehicular Cradle.
NOTE: Use the supplied fastening hardware to rigidly secure the cradle. An unsecured cradle
could cause a unit to move and interfere with the proper operation of the vehicle. The charging
cradle must be mounted in such a way that the MXP600 radio is within easy reach of the driver
during normal operation of the vehicle. Sufficient room should be allowed to permit the insertion
of the radio. Provide easy access to the release mechanism of the radio from the cradle.
MN007820A01-AB
Chapter 2 : Installation Procedures
10