background image

Sarix Professional 4 Bullet Camera Installation Manual

C6726M | 11/22

15

 4.  If the camera is turned sideways to look vertically at a scene, you can remove the sun shroud then 

re-install it to cover the camera's new angle of view.    

Zooming and Focusing the Camera

 

l

In the camera web browser interface, use the camera’s Image and Display settings to zoom and 
focus the camera.    

 a.  Use the zoom buttons to zoom the camera in or out.

 b.  Click 

Auto Focus

 to focus the lens.

 c.  Use the focus near and far buttons to manually adjust the focus.

 (Optional) Configuring microSD Card Storage

To use the  camera's SD card storage feature, you must insert a microSD card into the card slot.

It is recommended that the microSD card have a write speed of class 10 or better. If the microSD card 
does not meet the recommended write speed, the recording performance may suffer and result in the 
loss of frames or footage.

 1.  Insert a microSD card into the camera. Do not force the microSD card into the camera or you may 

damage the card and the camera. 

 2.  Access the camera’s web interface to enable the onboard storage feature. For more information, 

see the Pelco Sarix Professional 4 Bullet Camera Operations Manual.

Summary of Contents for PELCO Sarix Professional 4





















Reviews: