Version 1.5
© Openpath 2021
15
Blinking Yellow
indicates that the SDC is updating software; appears
when the SDC has been online for less than 24 hours
Solid Blue
indicates that the SDC has finished booting and is ready for
provisioning
Solid Purple
indicates that the SDC is connected to the Open Admin
app
Blinking Purple
indicates the SDC is ready to connect to the Open
Admin app
Solid Red
indicates the SDC is in an error state--refer to
Troubleshooting the SDC
The Openpath SDC has eight port LEDs and two power LEDs. The port LEDs indicate the
following:
l
Openpath Readers or Wiegand Readers
o
Solid:
Normal operation
o
Blinking:
Error state
l
Sensors (including REX and Contact Sensors)
o
Solid:
Active
o
Blinking:
EOL shorted or cut
l
Locking hardware (relays)
o
Solid:
Relay is energized
o
Blinking:
Fault detection
