4.3
Attaching or Removing the Battery
WARNING:
For Intrinsic Safe (IS) radio, if a non-IS or unapproved battery is inserted into the radio a
warning message will prompt.
Risk of explosion if the battery is replaced by an incorrect type.
Attaching the Battery
Procedure:
1
Align the battery with the rails on the back of the radio.
2
Push the battery down, until the latch snaps into place.
Removing the Battery
Procedure:
Lift the battery from the back of the radio.
4.4
Charging the Radio
Procedure:
To charge, connect the USB cable to your radio and a USB port.
MN007267A01-AA
Chapter 4: Getting Started
14
