Motorola solutions MCC 7100 IP, Setup And User Manual

Page: 48 / 170

Setting Up SNMP Services Inside the ASTRO RNI
The services for Windows Simple Network Management Protocol (SNMP) are initially configured in
Windows.
Procedure:
1 In the Control Panel of the Windows operating system, navigate to the Programs and
Features pane.
2
From the left-hand menu, select
Turn Windows features on or off
.
3
In the
Windows Features
window, expand the
Simple Network Management Protocol
(SNMP)
node.
4
Select the
WMI SNMP Provider
check box.
5 Click OK .
Configuring Windows SNMP Components for a Console Inside the
ASTRO RNI
The configuration of Simple Network Management Protocol (SNMP) allows the computer to receive
SNMP trap messages. These messages are then forwarded to SNMP management programs running
on the computer.
NOTICE: The following procedure is required for all consoles (regardless of which SNMP
version is in use). Secure SNMP version 3 (SNMPv3) configuration should be performed later
when applicable. See “Configuring Console Site Elements for SNMPv3” in the
SNMPv3 manual.
NOTICE: The SNMP services are not available for a console deployed outside the ASTRO
®
25
Radio Network Infrastructure (RNI).
Procedure:
1
In the
Control Panel
of the Windows operating system, navigate to the
Administrative Tools
pane.
2
Double-click
Services
.
NOTICE: If a User Account Control dialog box displays, click Continue .
3 In the Services window, double-click SNMP Trap .
4
In the
General
tab of
SNMP Trap Properties
window, from the
Startup type
drop-down list,
select Disabled . Click OK .
5
In the
Services
window, double-click
SNMP Service
.
6 In the Security tab of the SNMP Service Properties window, select the Send authentication
trap check box.
7
In the
Accepted community names
section, click
Add
.
8 In the SNMP Service Configuration window, add a community:
a
From the
Community rights
drop-down list, select
READ WRITE
.
b
In the
Community Name
field, enter
M
.
c Click Add .
9 In the SNMP Service Configuration window, add another community:
a
From the
Community rights
drop-down list, select
READ ONLY
.
MN000672A01-E
Chapter 2: MCC 7100 IP Dispatch Console Setup and Installation
48 Send Feedback