Motorola solutions MCC 7100 IP, Setup And User Manual

Page: 130 / 170

Figure 21: Speaker Test
An audible tone is sent to the speaker.
3
Close the Peripheral Configuration Tool by clicking
OK
.
Configuring a non-Motorola Headset
To configure a non-Motorola headset, associate the headset speaker and the headset microphone. If
the headset has a Push-to-Talk (PTT) button, you can also configure the headset PTT. You can
configure the non-Motorola headset only as
Headset 1 .
Procedure:
1
From the Windows
Start
menu, select
All Programs
→
Motorola
→
MCC 7100 Dispatch
→
Peripheral Configuration Tool .
2
Select the
Audio Outputs
tab.
3
From the drop-down list next to the device that you want to configure as your headset speaker,
select
Headset 1 Speaker
.
The ear piece speaker on the headset icon in the Summary pane is highlighted.
4
Select the
Audio Inputs
tab.
5 From the drop-down list next to the device that you want to configure as your headset
microphone, select
Headset 1 Microphone
.
The microphone on the headset icon in the Summary pane is highlighted.
6
If the headset contains a PTT button, select the
PTT/Monitor
tab.
7 From the drop-down list next to the device that you want to configure as your headset PTT,
select
Headset 1 PTT .
8 Save the profile:
• To save the changes to the existing profile, select
Apply
.
• To save the changes as a new profile, select
Save As
.
9 Close the Peripheral Configuration Tool by clicking OK .
Audio Inputs Tab
The
Audio Inputs
tab displays all the audio microphone devices configured in the Windows operating
system.
To remove a device from the list of available devices, disable the input device in the
Sound panel of
the Windows operating system. To open the
Sound
panel, click the
Control Panel
button in the
Peripheral Configuration Tool.
MN000672A01-E
Chapter 5: Console Dispatch Status and Peripheral Configuration Tool
130 Send Feedback