Accessing the Camera Web Interface
After the camera has been installed, you need the camera's IP address to access the web interface. The IP address can
be found in the following:
l
The IndigoVision Control Center software — Find the camera under visible devices.
l
Camera Configuration Tool — Go to the Network tab to see the details of the selected cameras.
Once you have the IP address, complete the following procedure to access the web interface:
Note: The web browser must be configured to accept cookies or the camera web interface will not function
correctly.
1. On a computer with access to the same network as the camera, enter the camera's IP address into a web
browser:
http://
<camera IP address>
/
For example: http://192.168.1.40/
2. You will be asked to create a user with administrator privileges before the device will be operational. For more
information, see
Creating the Initial User and Logging In
.
Creating the Initial User and Logging In
Cameras do not have a default username and password and will be in a factory default state.
Important: You must create a user with
administrator
privileges before the camera is operational.
If the camera is in the factory default state, you will be redirected to the Add User page to create an administrator user:
1. Enter a new User Name as
administrator
.
2. Enter a new Password for the user. It is recommended to use a secure and complex password.
3. Confirm the new password.
4. For the first user,
Administrator
must be selected in the Security Group drop-down menu.
5. Click Apply. After creating the user, you will be asked to login.
Logging In
You will automatically be prompted to enter your username and password to access the camera.
Accessing the Camera Web Interface
2
