Motorline MLB2, User Manual

Page: 8 / 14

7A 7B
EN EN
05. PROGRAMMING
05. PROGRAMMING
This is the validation method that the device uses to authorize access to users.
To make changes, you must enter programming mode.
OPERATIONS INSTRUCTIONS
• Card Input
# 0 4
•
Card or Fingerprint Input
# 2 4
•
Fingerprint Input
# 3 4
•
Card and Fingerprint Input
# 4 4
The default validation mode on the device is
# 2 4
. Entry with Card or Fingerprint.
To unlock the door you can use the Fingerprint or Card or both (depends on the Operating Mode).
OPERATING MODE
DOOR OPENING
OPERATIONS INSTRUCTIONS
•
User with fingerprint
• User with card
Read Card
The device uses an LDR (light dependent resistor) as an anti-theft alarm. If the keyboard is removed
from the cover, the tampering alarm will be activated.
ANTI THEFT ALARM
OPERATIONS
These operations can only be done in Programming Mode .
OPERATIONS INSTRUCTIONS
•
Add User with Fingerprint
With Auto ID
With Specific
ID
•
Add User with Card
With Auto ID
With Specific
ID
• Delete User with Finger-
print
2 #
•
Delete User with Card
•
Delete User with ID
Read Fingerprint
Fingerprint 1 # Repeat Fingerprint
User ID 1 # Fingerprint
Repeat Fingerprint
#
Read Card 1 #
or
or
Enter 8/10 Card Numbers 1
#
User ID 1 #
#
#
Read Card
User ID 1
Enter 8/10 Card Numbers
Enter 8/10 Card Numbers
Fingerprint
Read Card 2 #
2 #
or
2
#
User ID