5A
5B
14
15
16
EN
EN
BOOM ASSEMBLY
BOOM SUPPORT INSTALLATION
04. INSTALLATION
04. INSTALLATION
To assemble the boom, you must place the boom on the barrier fixing plate and align
the four holes on each piece. The you just need to place the boom fastening metal
plate and use the screws to fasten the three parts together.
When the boom is fixed, use the cover to hide these fastening parts.
After assembling the boom, you must define the length of it so that you can fix the
boom support, as visible on the image above.
When the boom’s length is decided, fix it with the two small screws situated at the end
of the fix part of the boom.
When the position of the boom’s support is
defined, you can fix it to the ground.
Make two holes on the fixing ground, and
place the screws supplied.
Align the support holes with those same
screws and fasten the support using the
nuts.
