Motorline professional mbm6 Installer And User Manual Download Page 4

3A

3B

01 

02

03

04

05

06

07

EN

EN

03. OPERATOR

03. OPERATOR

LOCKING/UNLOCKING

WARNING LIGHT

The MBM6 barrier is a product developed with the purpose of controlling the access of 

vehicles to private, industrial and commercial areas.

One of the main functionalities is the warning light capable of emitting different colors. 

This was developed to identify the different stages of the boom (opening, openned and 

closing) in a more clear and visible way.

In case of power failure, the barrier is equipped with a manual unlocking and locking 

system. Follow the bellow instructions to unlock or lock the barrier.

DETAIL: 

Barrier’s warning light

During pausing time while openned - 

warning light emits BLUE light

During closing course - warning light 

emits RED light

01•

 Open the door using the key supplied 

with the barrier. Rotate the key to unlock 

the door and pull it towards outside.

On the interior, you will have access to 

the unlocking system.

During opening course - warning light 

emits GREEN light

02•

 The unlocking is made by pressing 

and rotating the motor wheel shaded 

on the image on the side. The rotation 

direction to unlock will depend on the 

current stage of the boom (opened or 

closed) which will make the rotation 

possible to only one side. 

You must rotate the red wheel to the 

easiest side.

To lock the barrier, you must do the same 

steps because once it is unlocked, the 

red wheel will only be able to rotate to 

one of the sides.

Summary of Contents for mbm6









Reviews: