01.A
01.B
▷ INDEX
00
.
CONTENT
00. CONTENT
▷ index
| p. 01.A
01. SAFETY INSTRUCTIONS
▷ standards to follow
| p. 01.B
02. AWNING
▷ technical characteristics
| p. 02.A
▷ exploded view
|
p. 02.B
03. INSTALLATION
▷ pre-installation info
| p. 03.A
▷ wall installation
| p. 03.B
▷ ceiling installation
| p. 05.A
▷ arm inclination adjustment
| p. 05.B
▷ articulation adjustment
| p. 06.A
▷ manual release
| p. 06.B
▷ limit switch adjustment
| p. 06.B
▷ limit switch tuning of motor volante
| p. 07.A
▷ fabric regulation
| p. 07.A
▷ connection scheme
| p. 07.B
04. MC65 CONTROL BOARD
▷ technical specifications
| p. 08.A
▷ control board connections
| p. 08.B
▷ group or general centralization
| p. 08.B
▷ functions
| p. 09.A
▷ programming
| p. 10.B
05. MC7 CONTROL BOARD
▷ technical specifications
| p. 12.B
▷ control board connections
| p. 12.B
▷ functions
| p. 13.A
▷ programming
| p. 13.B
06. TROUBLESHOOTING
▷ instructions for consumers and specialized technical
| p. 15.B
07. CONNECTIONS TO CONTROL BOARD
▷ standards to follow (control board MC6 and MC7)
| p. 16.A
STANDARDS TO FOLLOW ◁
01
.
SAFETY INSTRUCTIONS
ATTENTION:
▷ To ensure the people’s safety, it is important that you read all the following
instructions. Incorrect installation or incorrect use of the product can cause physical
injury and material damage.
▷ Keep these instructions in a safe place for future reference.
▷ This product was designed and produced strictly for the use indicated in
this manual. Any other use, not expressly indicated here, could compromise the good
condition/operation of the product and/or be a source of danger.
▷
ELECTROCELOS S.A.
is not responsible for the improper use of the
product, or other use than that for which it was designed.
▷
ELECTROCELOS S.A.
is not responsible if safety standards were not taken
into account when installing the equipment, or for any deformation that may occur to it.
▷
ELECTROCELOS S.A.
is not responsible for the safety and proper opera-
tion when using components not sold by them.
▷ Do not make any modifications to the operator components and / or their
accessories.
▷ Before installation unplug the automatism from the source of power.
▷ Do not perform the installation before adverse climatic conditions (wind,
rain, snow).
▷ The installer must inform the client how to handle the product in case of
emergency and provide this manual to user.
▷ Keep transmitters away from children, to prevent the automated system
from being activated involuntarily.
▷ The customer shall not, under any circumstances, attempt to repair or tune
the operator. Must call qualified technician only.
▷ Connect the awning to a 230V plug with ground wire.
