© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
8MANULHYDDOC0004 REV 1.0
www.motorcitywashworks.com
3
WARNING!
MCWW HYDRAULIC MOTOR ASSEMBLIES RUNS WITH THE FOLLOWING FLUIDS:
-
ALL SEALED AND OPEN SEAL (BEARING-LESS) GEAR-MOTOR
ASSEMBLIES WILL RUN WITH PREMIUM GRADE HYDRAULIC OIL,150
(SUS) VISCOSITY @ 100°F MEETING ISO 40 REQUIREMENTS.
-
ONLY SEALED GEAR-MOTOR ASSEMBLIES CAN RUN WITH
WATER/GLYCOL BASED FLUID LIKE:
HOUGHTO SAFE 620: http://www.houghton.ca/products.asp?Cat=2&SubCat=13
AQUABLUE:
http://www.tapcollc.com/aquablue2.html
UCON™ HYDROLUBE DG-732:
http://www.dow.com/ucon/formulated/fluids/fire_res.htm
DO NOT RUN OPEN SEAL (BEARING-LESS) GEAR-MOTOR USING
WATER BASED FLUID!
DOING SO WILL REDUCE THE LIFE OF THE GEAR-REDUCER
AND WILL VOID YOUR WARRANTY!
HYDRAULIC POWER PACK
POWERSYS0013
HYDRAULIC POWER PACK
POWERSYS0015
ELECTRICAL
CONTROL POWER: SITE SPACIFIC
MOTORS: 10HP [0013] 28 - 14 AMP @
208-460 VAC, 3 PH [WIRE DELTA RUN]
CONTROL POWER: SITE SPACIFIC
MOTORS: 15 HP [0015] 42 – 21 AMP @ 208-
460 VAC, 3 PH [WIRE DELTA RUN]
HYDRAULIC
PUMP
15 GPM @ 900 PSI [0013] 3 SPEED
VALVES AVAILABLE STANDARD
20 GPM @ 900 PSI [0015] 4 SPEED VALVES
AVAILIBLE STANDARD [CAN EXPAND TO 6
TOTAL SOLD SEPERATLY]
HYDRAULIC
MOTOR
VARIES APON EQUIPMENT USED.
REFER TO SPACIFIC MANUAL
VARIES APON EQUIPMENT USED. REFER
TO SPACIFIC MANUAL
HYDRAULIC
OIL
PETROLIUM BASE VISCOSITY ISO 32-46 PETROLIUM BASE VISCOSITY ISO 32-46
