12
TR
OUBLE
SHOO
TING
TE
CHNIC
AL SPE
CIFIC
ATIONS
PROBLEM
POSSIBLE CAUSE
SOLUTION
Correctly connected
to battery, but not
charging.
• Battery voltage is too low.
• The bank is turned off (indicated by
lit
and LEDs).
• Bad fuse on the leads.
• The battery may be defective.
Have the battery checked and
replace if necessary.
• Press the
12V
button to select
battery type; charging will then start.
• Replace the fuse.
The red LED is flashing. Connections are reversed.
Reverse the connections.
The red LED is solid;
no charging status/
,
or
battery
type LED is lit.
The charger has detected a problem
with the battery.
The battery may be defective.
Have the battery checked and replace
if necessary.
The red LED is solid
and
LED is lit.
No battery type is selected; the bank
is turned off.
Press the
12V
button to activate bank
and select battery type.
The red LED is solid
and
,
or
battery type LED is lit.
• Battery not connected.
• Bad fuse on the leads.
• Connect the battery.
• Replace the fuse.
TECHNICAL SPECIFICATIONS
Input voltage
120 V AC
Input frequency
60 Hz
Input current
3.7 A
Output voltage
12 V
Output current
15 A
Ingress protection rating
IP65
model no. 011-1985-4 | contact us 1-888-942-6686