WARNING!
Before cleaning make sure the power inverter is switched off and
disconnected from the power source.
• The exterior of the device should be cleaned periodically with a damp cloth or sponge and
a mild soap solution.
• Be sure vents and fans are free of dust or debris.
• Never immerse the device in water or any other liquid.
• For cleaning never use corrosive detergents, wire brushes, abrasive scourers, or metal or
sharp objects.
• Store the device in a cool, dry, location that is protected from moisture and out of the
reach of children.
Maintaining battery condition
• Vehicle batteries are designed to provide brief periods of very high current needed for
engine starting. They are not intended for constant deep discharge.
• Regularly operating the power inverter from a vehicle's battery until the low-voltage
alarm sounds will shorten the battery's life.
The battery operating time depends on:
• the charge level of the battery,
• the battery capacity,
• the amount of power drawn by the devices that are connected to the power inverter.
• With an average load of about 750 W connected to the power inverter, consider that
you will have to start the vehicle regularly, for example every hour or two, to recharge the
vehicle's battery.
• Prior to doing so, the power inverter must be disconnected from the power source
and must remain disconnected whilst charging is in progress.
• Consider connecting the power inverter to a separate deep-discharge type
of suitable battery if you will be frequently running electrical products for extended periods
of time.
Fuse replacement
WARNING!
For continued protection against risk of fire or electric shock replace only with same type
and rating of fuse (125 V, 8 A).
Follow the instructions to replace the fuse inside the 12 V outlet plug of your connector
cable (J):
Twist off the upper cover of the 12 V outlet plug.
Remove the faulty fuse.
Insert a new fuse and twist the cover of the plug back on.
24
model no. 011-1901-4 | contact us: 1-877-466-8191
25
MAINTENANCE
MAINTENANCE
