MOTOMA POWER CO., LTD
Http: // www.motoma.com
E-mail: [email protected]
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice.
2 / 7
This specification applies to MOTOMA sealed nickel metal-hydride cylindrical rechargeable
single battery and stack-up battery packs. All the data involving voltage and weight of stack-up
battery packs equal to the value of single cell times the number of single cell in the battery packs.
2. BATTERY M ODEL
Ni-MH 4-5SC1400P-1400mAh
3. NOMINAL SPECIFICATION
3.1 Nominal voltage
1.2V
3.2 Nominal capacity
1400mAh
3.3 Minimum capacity
1400mAh
3.4 Charging
Standard charging
140mA for 16 hours
Quick charging
280mA for 7 hours
Rapid charging
700mA for 2.4hours, –
ΔV=5mV
3.5 End voltage of discharge
1.0V
3.6 Operate temperature range (relative humidity: 45% ~85%)
Standard charge 0~45
℃
Quick charge 10~40
℃
Rapid charge 10~30
℃
Discharge: -10~50
℃
3.7 Storage (relative humidity:
45%
~85% )
Less than 30 days -20~50
℃
Less than 90 days -20~40
℃
Less than 1 year -20~30
℃
3.8 Weight
Approx. 35.5g
3.9 Dimensions
Shown in the page 7
※
Note:
Discharge capacity: When the battery is discharged at
280mA
to 1.0V after being standard charged.
Five cycles are permitted for this test. The test shall be terminated at the end of the first cycle when it
reaches the nominal capacity.
Unless otherwise stated in these specifications, the battery should be discharged to 1.0V with
280mA
before charging.
4. APPEARANCE PERFORMANCE
There shall be no practical damage such as conspicuous liquid electrolyte leakage, flow and dirt
under conditions of storage or operation as specified herein.
5. ELECTRICAL CHARACTERISTICS
