13
11.03.17 Maximum Negative Acceleration Reached (m/s
2
)
Under this value, the maximum negative acceleration is recorded (delete by push-button level 2).
11.3.18 Gear Indicator
The gear indicator displays the current gear as numeral from 1 to 6 on the display, on the left hand
side next to the ground speed. Condition for displaying this value is the implementation of the
learning function (see setup‚ menu PARAM, subitem GearTCH). The gear shift indicator is a
mathematical function and is calculated from rpm and ground speed values. No additional sensors
or connectors are required.
12 The Setup
Operation and setup of the motoscope classic is conducted via one push-button. For this reason,
the setup is organised in "levels". Push-button activation for different durations is used for toggling
and selecting these levels. The activation time of the push-button is indicated by 1, 2 or 3
horizontal lines on the display.
The setup is accessed by a level 3 push-button action.
The topmost line displays the selected setup menu (SCREEN, LCD, MOTOR, PARAM, SENSOR,
RESET) while the lower line shows the selected option.
The next menu or the next option is selected with a level 1 push-button action.
Switching from menu (upper line) to option (lower line) is achieved by a level 2 push-button action
and is indicated by a small rectangle.
Exiting the active option or the setup is always achieved by a level 2 push-button action. Please
refer to the overview in the appendix for a guide to toggling and selecting levels and subitems.
12.1 The Subitem SCREEN (Display Setup)
Definition of display values. A level 2 push-button action switches to the lower line (option). You
can chose any display value by a level 2 push-button action. A level 2 push-button action selects
the value. An arrow is displayed. Now the displayed value can be toggled "on" or "off" by a level 1
push-button action. The factory default for all displayed values is "on". The following features can
be activated or deactivated:
•
ODO1
(day trip meter)
•
ODO2
(total trip meter)
•
TIME
(trip time)
•
VOLT
(on-board voltage)
•
TMP1
(temperature 1)
•
TMP2
(temperature 2)
•
PRES
(pressure)
•
ACCE
(acceleration)
•
RPM
(engine rpm)
•
AVG
(average speed)
•
0100
(timekeeping 0-100 km/h)
•
MAXS (maximum speed)
•
MAXR (maximum engine rpm)
•
MAXA (maximum positive acceleration)
•
MINA
(maximum negative acceleration)
A level 3 push-button action exits the option and the menu.
12.2 The Subitem LCD (Display Setup)
The option CNTR sets the display contrast in steps from 0 to 6.
