•
Check that the rubber bellows are not cut or pierced; otherwise, replace it.
•
Check that the swingarm pin threads and the swingarm fixing nuts are not damaged, de-
formed or flattened; otherwise, replace them.
•
Check that the sleeve grooves are not damaged, deformed or deteriorated; otherwise, re-
place the sleeve.
•
Check that the spring is not deformed; otherwise, replace it.
•
Check that the sealing ring (Seeger) is still flexible and is not deformed.
•
Check that the sleeve outer toothing and internal grooves are not damaged.
Installing
•
Insert the swingarm on the gearbox
cover.
•
Tighten thoroughly the pin on the left
side until the shimming washer on the
right side rests on the bearing fitted on
the gearbox cover.
•
Tighten thoroughly the pin on the right
side, without locking it.
•
Operate the swingarm and make sure
it oscillates freely without clearance.
•
Screw in the lock nuts on the pins, lock-
ing them thoroughly.
Chassis
NEVADA 750
CHAS - 102
Summary of Contents for NEVADA 750
