MOTO GUZZI NEVADA 750, Service Station Manual

Page: 17 / 128

HANDLEBAR AND CONTROLS
Name Torque in Nm
Retainer for handlebar support U-bolts on steering plate -
M10x60 (2)
50 Nm (36.88 lbf ft)
Handlebar lock U-bolts retainer - M8x30 (2+2) 25 Nm (18.44 lbf ft)
Right and left light switch retainer - M5 (2) 1.5 Nm (1.11 lbf ft)
Retainer for clutch and brake pump U-bolts - M6 (2+2) 10 Nm (7.37 lbf ft)
Mirror - M10 (1+1) Manual
ELECTRICAL SYSTEM
Name Torque in Nm
Voltage regulator retainer - M6x30 (2) 10 Nm (7.37 lbf ft)
Horn retainer (screw+nut) - M6x16 (1) 10 Nm (7.37 lbf ft)
Coil retainer - AT M4x25 (4) 3 Nm (2.21 lbf ft)
Fuse box bracket retainer - M5x12 (2) 4 Nm (2.95 lbf ft)
Control unit retainer (4) 3 Nm (2.21 lbf ft)
Battery housing bracket retainer (2) 3 Nm (2.21 lbf ft)
Odometer sensor to calliper holding plate retainer - M6x12 (1) 10 Nm (7.37 lbf ft)
INSTRUMENT PANEL AND LIGHTS
Name Torque in Nm
Instrument panel to light support retainer - M6 (3+3) 10 Nm (7.37 lbf ft)
Headlamp retainer - M8x30 (2) 15 Nm (11.06 lbf ft)
Front and rear turn indicator retainer (screw + nut) - M6 (2+2) 5 Nm (3.69 lbf ft)
Rear light support to mudguard retainer - M5x14 (3) 4 Nm (2.95 lbf ft)
FUEL PUMP FLANGE
Name Torque in Nm
Pump support to tank retainer - M5x16 (6) 6 Nm (4.42 lbf ft)
FUEL TANK
Name Torque in Nm
Cap flange to fuel tank retainer - M5x12 (5) 4 Nm (2.95 lbf ft)
Tank rear retainer - M8x45 (1) 25 Nm (18.44 lbf ft)
CHASSIS / FAIRINGS (FRONT)
Name Torque in Nm
Stabiliser plate to fork retainer - M8x40 (4) 15 Nm (11.06 lbf ft) - Loctite 243
Front mudguard to stabiliser plate retainer - M6x11 (4) 10 Nm (7.37 lbf ft) - Loctite 243
Headstock protection panel retainer - M5x12 (1) 4 Nm (2.95 lbf ft)
CHASSIS / FAIRINGS (CENTRE)
Name Torque in Nm
Right and left throttle body protection retainer - M5x14 (2) 4 Nm (2.95 lbf ft)
Right and left fairing retainer - M5x9 (1+1) 4 Nm (2.95 lbf ft)
CHASSIS/ FAIRINGS (REAR)
Name Torque in Nm
Rear mudguard front and central retainer - M6 (2+1) 10 Nm (7.37 lbf ft)
Rear mudguard rear retainer - M8x30 (2) 25 Nm (18.44 lbf ft)
Retroreflector to support retainer - M5 (1) 4 Nm (2.95 lbf ft)
Retroreflector support to license plate holder retainer - M5x10
(2)
4 Nm (2.95 lbf ft)
License plate holder to mudguard reinforcement retainer (3) 3 Nm (2.21 lbf ft)
FINISHINGS
Name Torque in Nm
Ignition lock retainer - shear head screw - M8x15 (1) at the point of failure
Ignition lock retainer - M8x16 (1) 25 Nm (18.44 lbf ft)
Saddle opening lock retainer - M6x25 (2) 10 Nm (7.37 lbf ft)
NEVADA 750
Characteristics
CHAR - 17