MOTO GUZZI NEVADA 750, Service Station Manual

Page: 16 / 128

Name Torque in Nm
Lock nut on pin retainer - M20x1 (2) 50 Nm (36.88 lbf ft) - keep the pin firmly in place
Swingarm to gearcase retainer - M8 (4) 25 Nm (18.44 lbf ft) - keep the pin firmly in place
FRONT SUSPENSION
Name Torque in Nm
Fork stem on lower/upper plate retainer - M10x40 (2+2) 50 Nm (36.88 lbf ft)
Headstock nut - M23x1 (1) 50 Nm (36.88 lbf ft)
Headstock ring nut - M25x1 (1) 7 Nm (5.16 lbf ft) - the headstock should turn freely
Fork stem cap (1+1) 50 Nm (36.88 lbf ft)
Fork hub cap - M6x30 (2) 10 Nm (7.37 lbf ft)
REAR SUSPENSION
Name Torque in Nm
Shock absorber to chassis upper retainer - M6x35 (1+1) 10 Nm (7.37 lbf ft) - Loctite 243
Left shock absorber to swingarm retainer - M10x1.5 (1) 35 Nm (25.81 lbf ft)
Right shock absorber stud bolt to housing retainer - M12x1.5
(1)
35 Nm (25.81 lbf ft)
Right shock absorber to stud bolt retainer - M6x16 (1) 10 Nm (7.37 lbf ft) - Loctite 243
AIR FILTER CASING
Name Torque in Nm
Filter casing cover retainer (4) 3 Nm (2.21 lbf ft)
Filter casing to chassis retainer (3) 3 Nm (2.21 lbf ft)
Air temperature sensor retainer (2) 2 Nm (1.47 lbf ft)
EXHAUST
Name Torque in Nm
Exhaust pipe to engine retainer - M6 (2+2) 10 Nm (7.37 lbf ft)
Exhaust pipe to compensator retainer (clamp) - M6 (2) 10 Nm (7.38 lbf ft)
Exhaust pipe to silencer retainer (clamp) - M6 (1+1) 10 Nm (7.37 lbf ft)
Lambda probe retainer - M18x1.5 (1) 38 Nm (28.03 lbf ft)
Mufflers to support retainer - M8x25 (4) 25 Nm (18.44 lbf ft) - Loctite 601
Right and left heat guard bulkhead retainer - M6x12 (2+2) 10 Nm (7.37 lbf ft) - Loctite 270
Muffler support to chassis retainer - M8 (1) 25 Nm (18.44 lbf ft)
FRONT WHEEL
Name Torque in Nm
Brake disc retainer - M8x20 (6) 25 Nm (18.44 lbf ft) - Loctite 243
Wheel pin - M18x1.5 (1) 80 Nm (59 lbf ft)
R
EAR WHEEL
Name Torque in Nm
Brake disc retainer - M8x25 (6) 25 Nm (18.44 lbf ft) - Loctite 243
Wheel bolt + nut - M16 (1) 120 Nm (88.51 lbf ft)
Screw + lock clamp nut - M10 (1) 30 Nm (22.13 lbf ft)
FRONT BRAKING SYSTEM
Name Torque in Nm
Front calliper retainer - M10x30 (2) 50 Nm (36.88 lbf ft)
REAR BRAKING SYSTEM
Name Torque in Nm
Rear calliper retainer - M8x35 (2) 25 Nm (18.44 lbf ft)
Calliper holding plate to swingarm retainer - M16x1 (1) 25 Nm (18.44 lbf ft)
Rear brake lever nut - M8 (1) 25 Nm (18.44 lbf ft)
Rear brake fluid reservoir retainer - M5x15 (1) 6 Nm (4.42 lbf ft)
Lever lock spacer retainer - M6x16 (1) 10 Nm (7.37 lbf ft)
Rear brake rod lock nut - M6 (1) manual
Brake pump retainer - M6x25 (2) 10 Nm (7.37 lbf ft)
Characteristics
NEVADA 750
CHAR - 16