Motion Zhermack MX-300, User Manual

Page: 9 / 128

9
EN
Alginate Mixer MX-300
Table of contents:
1. Preface
2. Note
3. Important subjects of accident prevention
and malfunction
4. Name of each portion
5. Installation
6. Operation method
7. Setting for mixing time
8. Maintenance
9. Trouble shooting
10. Specification
11. Introduction
12. General cleaning procedures
13. Fuse replacement information
14. Electromagnetic interference
15. Waste disposal
16. Warranty
17. Spare parts list
1. Preface
Thanks for your purchasing MX-300 Alginate Mixer.
Prior to using the product, please read this USER MANUAL
carefully and its correct maintenance to enable the func-
tion can be fully implemented.
After reading this USER MANUAL, please keep it properly.
If there is any further improvement or the contents of this
manual shall have any further amendment, no notice shall
be otherwise advised.
2. Note
2.1 We shall not assume any responsibility if any malfunc-
tion, damage, or accident of personal body injure is
caused by the improper removal, modification, main-
tenance, or repair as not being conducted by the
dealer designated by us.
2.2 We shall not assume any responsibility if any malfunc-
tion, damage, or accident of personal body injure is
caused by the use of the product not provided by us.
2.3 We shall not assume any responsibility if any malfunc-
tion, damage, or accident of personal body injure is
caused by the improper removal, modification, main-
tenance, or repair as not use the parts provided by us.
2.4 We shall not assume any responsibility if any malfunc-
tion, damage, or accident of personal body injure is
caused by the improper operation as not in compli-
ance with the manual.
2.5 We shall not assume any responsibility if any malfunc-
tion, damage, or accident of personal body injure is
caused by the ambient environment as not in compli-
ance with the power, installation environment and
using conditions specified on this manual.
2.6 We shall not assume any responsibility if any malfunc-
tion, damage, or accident of personal body injure is
caused by fire disaster, earthquake, flood, or struck by
lighting.
3. Important subjects of accident prevention or mal-
function
Prior to reading the operation of “ALGINATE MX-300”,
please read first the “Important notes” marked. The opera-
tion shall be in compliance with “Important Notes” and
“Notes for the Use of Medical Therapeutic Machine (Safety
and Danger Prevention)” specified on the manual so as to
avoid any malfunction in advance, and please use correct-
ly to avoid any personal injure.
Important notes for the possible personal injure while
in use
The operation shall be in compliance with “Important
Notes” and “Notes for the Use of Medical Therapeutic
Machine (Safety and Danger Prevention)” specified on the
manual so as to avoid any malfunction in advance, and
please use correctly to avoid any personal injure.
Danger
It is possible to cause death or serious injure.
Warning
It may cause malfunction or damage to the machine.
Notes
It is possible to cause slight personal injuries or damage to
machine.
Important
It should be noted closely, or possible to cause malfunc-
tion of machine.
Important information
The responsibility for the operation of medical therapeutic
machine and maintenance inspection is attributable to
the user (hospital or clinic).
The operation of medical therapeutic machine shall be
conducted by the authorized person (assistant, dentist,
and nurse).
The purpose of this device is to automatic mix alginate
powder and water in order to take dental impressions.
Alginate mixer MX-300 reduces air bubbles inside the
mixture in order to reach a better result in the final impres-
sion.
Notes
Any serious incident that has occurred in relation to this
device should be reported to Motion Dental Equipment
Corporation, Our EU representative, and related govern-
ment authorities.
Our EU representative information is located on the label
sticker on the mixer.
Alginate Mixer MX-300
EN