Motion CM-17, Manual

Page: 8 / 52

3
3.3
3.1
3.2
3. PAIR A REMOTE
Pair a remote
Shortly press the program button on the motor. The blind will start
stepping, indicating that program mode has been activated.
(The blind keeps stepping until the program mode is deactivated)
Press the pair button on the back of the remote control to pair the blind
with the selected channel.
The blind will shortly stop stepping, indicating that the remote has been
paired to the blind.
Select a desired channel for the blind by pressing 1 of the 4 channel buttons
on the remote control.