GENERAL SAFETY INSTRUCTIONS
Please be sure to read these instructions before using the biological microscope. Additional
information is available upon request from our maintenance department or authorized
agency. To ensure safe operation and guarantee good performance of the microscope please
pay attention to the precautions and warnings specified in the Operation Instructions.
INSTRUMENT SAFETY
The SILVER250 Series biological microscope has been designed, manufactured and
inspected according to the EN 61010-1:2001 Safety Requirements for Electrical Equipment
for Measurement, Control and Laboratory Use.
UNPACKING, TRANSPORTATION & STORAGE
The original shipping container, a foam box in a fiberboard carton, should be kept for use in
long term storage or return shipment. When unpacking, please check the components
according to the packing list. Please comply with the temperature requirements for transport
and storage specified in the appendix of this manual. Set up, use and store the unpacked
microscope on a firm and flat workbench. Please do not touch the optical lens surfaces.
WASTE DISPOSAL
Important:
Any damaged biological microscope must not be treated as general waste; it
should be disposed of according to relevant regulations.
OPERATION
When using the biological microscope, please pay attention to the following safety instruc-
tions:
• If it is used for any purpose other than the specified ones, including any individual compo-
nent or part, the manufacturer will not take any responsibility.
• After-sales service or repair done by unauthorized personnel will void the warranty.
• Anyone who uses the instrument should receive instruction on the proper handling of the
instrument and safety practices for microscopy. The biological microscope shall be placed
only on a firm, flat workbench for operation.
• Since the biological microscope is a precision instrument, improper operation will impair or
spoil its performance.
• The power unit is integrated in the main unit of the biological microscope: the grid supply
voltage is within 100-240V~50Hz.
The biological microscope must be connected only to the normal power socket with a
grounding terminal. Any extension cord without ground protection is not allowed to avoid
failure of the protection function.
SILVER
250
SERIES
| 02
SAFETY INSTRUCTIONS
SILVER
LINE
