3. SETUP
3.1
Mount eyepiece
z
When you first use this microscope after unpacking, remove the protective cap of the ocular
upper tube and mount the eyepiece.
z
The eyepieces use a high-eye-point system and have rubber eye cups attached. If you wear
eyeglasses, turn the rims outward.
3.2
Adjust the pupil distance of the eyepiece
While looking into the eyepieces and holding the binocular tubes with both bands, move the
tubes in the direction of the arrows (see the diagram below) until the two fields of view coincide.
(The pupil adjustment range is between 55 and 75mm, or 2.17 and 2.95 inches.)
7
