3. SETUP (CONTINUED)
z
Loosen up the lock screw and remove the protective cap of the CCD camera adapter mount.
z
Attach the assembled camera unit to the CCD camera adapter mount on trinocular head and
tighten it with the lock screws.
3.5
Mount Laser Unit
If you plan on using your PSM-1000 for laser work , you need a laser safety filter. To operate
the laser safely and properly, please see the laser and/or laser filter manufacturer’s documentation.
Motic Instruments assumes no responsibility whatsoever for the performance and/or safety of the
laser and/or laser filter used with the PSM-1000 microscope.
To install the safety filter and the laser safety pin, we have provided you with the shims and a
laser safety pin, please follow the instructions below.
z
With a screwdriver loosen the 3 screws (as shown below) and remove the binocular tube and
shim block.
9
