1
introduction introduccion
3
assembly
7
Attach the large back panel to the back
of the changing unit using 16, 3 x 16mm
cross head screws and the 5 back panel
plates
attaching the large back panel
7
Insert 16 dowels into the sides, center
panel and back support rail.
Insert 6 cam screws in to the top.
Insert 6 cams in to the sides and center
panel.
Attach the top to the sides, center panel
and back support rail by locating the
dowels and cam screws in to their
corresponding pre-drilled holes and
pushing firmly into position.
Lock the cams in to place using the cross
head screw driver by turning these in a
clockwise direction 180 degrees.
attaching the top
8