mothercare little hampton changing unit User Manual Download Page 11

1

4

care and safety

This dresser is not to be used for children over 12 months old or 9kg, whichever comes first.

WARNING! Do not leave the child unattended.

All assembly fittings should be tightened properly. Screws and bolts should not be loose because a child 

can squeeze part of the body, or clothing (e.g. strings, necklaces, ribbons for babies dummies etc.) could 

get caught. There would be a danger of strangulation.

Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires etc. in 

the near vicinity of the changing unit. 

An older child climbing on the changing unit while a child is on the changing surface is extremely dangerous 

and must be discouraged.

The changing unit must be used on a level and stable surface.

Keep away from trailing cords, drapes or flexes, and away from electric sockets.

If any part is missing or broken, do not use the changing unit until the correct spare part has been obtained 

from Mothercare.

Periodically check all fittings to ensure that none have come loose.

Clean your changing unit using a damp cloth and drying with a soft cloth. Never clean with abrasives, 

chemical cleaners or household polishes.

Take care when handling or moving the changing unit. Careless handling can damage wooden furniture. 

Never move the changing unit with the child on it.

care and safety

1

5

customer care

10

If you have a problem with this product or require replacement parts, please contact your nearest Mothercare 

store or telephone the Mothercare customer care line on 08453 30 40 30.

Alternatively write to: Customer Care, Mothercare, Cherry Tree Road, Watford, Herts, WD24 6SH.

www.mothercare.com

Summary of Contents for little hampton changing unit













Reviews: