1
introduction introduccion
3
assembly
Insert 8 dowels in to the front and back
rail.
Attach the front and back rail to the side
rails by pushing firmly into place.
Place the top rails on to the changing
unit top and secure on the underside with
2 x m6 x 36mm screws using the Allen
key provided.
Secure the back plates to the changing
unit sides using 2 x M6 x 14mm screws
using the Allen key provided.
attaching the changing unit top rails
11
9
It is possible to remove the side rails
and front rail of the changing unit to
make in to a dresser.
Remove the 2 underside M6 x 36mm
screws using the Allen key provided.
Remove the M6 x 36mm screw from the
rear sides and remove the top rails.
Insert 2 blanking screws in to the
changing unit top and secure using
2 x M6 x 14mm screws using the Allen
key provided.
Please carefully wrap the top rails in
protective packaging and stow away in a
safe place with all spare fittings in case
these will be required for future use.
changing to a dresser
12
