Motcom BeCOMS, User Manual, Page: 39 / 82

motcom
®
BeCOMS
®
User Manual
Release
220601
Page 5.1
Fig. 5.1 Example for the Installation position
!
5 Installation and Commissioning
Installation and commissioning of BeCOMS
®
must be conducted or supervised by
personnel from motcom GmbH or its authorized representatives only.
The installation procedure includes training for the site operation personnel. The
commissioning data will be provided to the customer as part of the training for later
reference.
During the initial installation the current BeCOMS
®
wiring will be adapted to the
existing alarm and monitoring system on site.
For further details please refer to the separate Installation Manual.
5.1 Installation Position
The Slip Ring Encoder is installed at the end of the crankshaft of the combustion
engine via an engine specific adapter (refer to Fig.5.1 and Fig.5.2). The evaluator
can be installed in the engine room near the engine or, alternatively, in the engine
control room. The length of signal cables must not exceed 100 m.
!