4
PixlArt416 V1.0 User Manual V1.1
© 2018 Moss LED Inc.
2 - Safety Notes
2.1
–
Supplying Power
Power to the controller and outputs is applied via a screw terminal connector, located on the left-
hand edge of the controller as shown in Figure 1. This connector is clearly marked on the chassis
with the polarity.
The voltage input can be anywhere between 5V and 24V DC independently and
it is the user’s
responsibility to ensure that the power supply used matches the voltage of the pixel fixture they are
using and that it can supply the correct amount of power/current.
The total maximum allowable
current through the controller is 30 Amps.
Figure 1
Power Input
Pixel Output 1
Pixel Output 3
Pixel Output 2
Pixel Output 4
