21
Remove Back Panel
Insert & Connect Battery
Plug Charger Into Battery Charging Powerhead
For accessories go to:
www.mosquitomagnet.com
INSTALLATION
Propane Tank Installation
1. After trap is placed in its ideal location, place propane tank onto the molded cradle.
2. Making sure propane tank is fully closed, attach propane regulator hose to propane
tank. Secure tightly by hand.
Do not use tools.
3. Turn propane on by slowly turning valve counter-clockwise. Take care not to turn
too quickly to avoid engagement of safety check valve regulator.
DO NOT MOVE TRAP WITH TANK ATTACHED!
TANK MUST BE
DISCONNECTED FROM REGULATOR BEFORE TRAP IS RELOCATED TO
AVOID DAMAGE TO REGULATOR AND/OR TRAP. BE ADVISED, DAMAGE
CAUSED FROM FAILURE TO COMPLY WITH THIS INSTRUCTION IS NOT
COVERED UNDER WARRANTY.
Propane Tank Changing Tips
When attaching the regulator handle to a tank after a tank change, be sure to fully tighten
the regulator handle onto the tank. No need to use tools, but do turn the handle as far as
possible by hand. When this is done, loosen the handle 1/4 turn, then re-tighten the
handle. Frequently this action will result in additional turns beyond the 1/4 turn. The
purpose for this is to fully engage the regulator onto the tank If the regulator is not fully
engaged, the flow of gas may be restricted to the point where the trap will show a gas
empty code. If this occurs, press the off button, close the tank valve, and remove the
regulator from the tank. Utilize Gas Reset Tool then re-attach the regulator and try again.
Step 1 — Propane Tank Placement
Step 2— Attach Regulator
Step 3— Slowly Open Valve
Woodstream Canada Corporation
1-800-800-1819
STARTING INSTRUCTIONS
It is recommended that you read the entire manual before starting the Mosquito Magnet®
Liberty Plus trap.
