21
Net Installation:
Lift clear plastic lid, lock plastic holding bracket of net into front of compartment. Close
plastic lid when finished.
Note:
Fabric loops hook over plastic posts allowing net to
expand to it highest capacity.
Net locks into front of compartment
Woodstream Canada Corporation
1-800-800-1819
CHARGING YOUR MOSQUITO MAGNET® LIBERTY PLUS
1. Remove cover panel from rear of Head Unit (panel snaps off).
2. Insert and connect re-chargeable battery.
3. Insert Charging Adapter into rear of Head Unit.
Allow to charge for 24 hours at the beginning of each season. You will not need to
charge again until next season. Replace cover panel when completed (panel snaps into
place).
NOTE:
Unit must be charged indoors, trap is not weatherproof with cover panel
removed.
Attractant Installation:
See Mosquito Magnet® Octenol Mosquito Attractant label for
installation, use, storage and disposal instructions.
TRAP PLACEMENT
1- Determine the direction of the prevailing wind. Check local weather patterns if you
are unsure.
2- Stand in the center of the area you are trying to protect and look toward the
prevailing wind.
3- Proper placement of the Mosquito Magnet® Liberty Plus will be 9-12 m (30-
40 ft) in front of you, within
1.5-1.8
m
(5-6
ft) of ground cover (i.e., bushes,
flowerbeds, treeline, marshbed, etc.)
4- It is recommended that the trap be placed in the shade.
5- Do not place trap directly above water source (sprinklers, hose, etc.).
6- Trap must be placed on level ground to avoid tipping or uneven propane
distribution.
