INSTALLATION AND ADVICE
NEW MAGIC WELD
MAGIC WELD 200
M
2.6
© MOSA
REV.0 - 11/08
18/11/08 22262-GB
INSTALLATION AND ADVICE BEFORE USE
■
Use in open space, air swept or vent exhaust gases,
which contain the deathly carbone oxyde, far from
the work area.
POSITION
Place the machine on a level surface at a distance of at
least 1,5 m from buildings or other plants.
Check that the air gets changed completely and the hot
air sent out does not come back inside the set so as to
cause a dangerous increase of the temperature.
☞
Make sure that the machine does not move during
the work:
block
it possibly with tools and/or devices
made to this purpose.
MOVES OF THE MACHINE
☞
At any move check that the engine is
off
, that there are
no connections with cables which impede the moves.
PLACE OF THE MACHINE AND/OR EQUIPMENTS
1,5
m
1,5
m
1,5
m
GAS
DI
SCARICO
Maximum leaning of the machine (in case of dislevel)
EXHA
UST OUTPUT
ATTENTION
For a safer use from the operator
DO NOT
fit the machine in locations with high risk of
flood
Please do not use the machine in weather
conditions which are beyond IP protection
shown both in the data plate and on page
named “technical data” in this same manual.
