ADVICE ENGINE DRIVEN WELDER
NEW MAGIC WELD
MAGIC WELD 200
M
2.2
© MOSA
REV.0 - 11/08
18/11/08 22262-GB
ADVICE BEFORE USE
The operator of the welder is responsible for the security of the people who work with the welder and for those in
the vicinity.
The security measures must satisfy the rules and regulations for engine driven welders.
The information given below is in addition to the local security norms.
➠
Do not touch any bare wires, leads or contacts as they may be live and there is danger of electric
shock which can cause death or serious burns. The electrode and welding cables, etc. are live
when the unit is operating.
➠
Do not touch any electrical parts or the electrode while standing in water or with wet hands, feet
or clothes.
➠
Insulate yourself from the work surface while welding. Use carpets or other insulating materials
to avoid physical contact with the work surface and the floor.
➠
Do not wind cables around the body.
➠
Always wear dry, insulating glovers, without holes, and body protection.
Estimate possible electromagnetic problems in the work area taking into account the following indi-
cations:
➠
Telephonic wirings and/or of communication, check wirings and so on, in the immediate vicinity.
➠
Radio and television receptors and transmettors.
➠
Computer and other checking devices.
➠
Critical devices for safety and/or for industrial checks.
➠
Peapol who, for instance, use pace-maker, hearing-aid for deaf or something and else.
➠
Devices used for rating and measuring.
➠
The immunity of other devices in the operation area of the welder. Make sure that other used devices
are compatible. If it is the case, provide other additional measures of protection.
➠
The daily duration of the welding time.
➠
It is forbidden to weld in rooms containing explosive gases.
➠
Keep flamable material away from the welding area.
➠
Do not weld on containers which contain flamable material.
➠
Do not weld near refuelling areas.
➠
Do not weld on easily flamable surfaces.
➠
Protect face and eyes (protective mask with suitable dark lens and side screens), ears and body
(non-flamable protective clothers).
➠
Avoid inhaling fumes by providing a ventilation system or, if not possible, use an approved air breather
➠
Do not work in closed areas where there is no fresh air flow.
➠
Do not use the welder to defrost (thaw) pipes.
➠
Use ear protections if the noise level is high.
DANGEROUS
Arc welders can be dangerous. Protect yourself and others
from any possible risks which may cause death or serious
injury.
