Mosa EAS 15-806, Use And Maintenance Manual, Page: 9 / 28

EAS15-806-GB.doc
EAS 15 - 806
REV.1-07/11
1.7 - Cautions levels
Below we give the symbols used in the manual to draw the reader’s attention to the different levels of danger in the “Use and Maintenance” of the
electric panel.
DANGER!! Information or procedures that, unless carried out meticulously, cause death or serious injury.
CAUTION!! Information or procedures that, unless carried out meticulously, could cause death or serious injury.
PRUDENCE!! Information or procedures that, unless carried out meticulously, could cause slight injury or damage to the electric
panel.
WARNING Information or procedures that advise the operator on the optimum use of the electric panel to extend its service life
and prevent damage.
NOTE Important information and procedures.
1.8 - Temporary Storage
In the case of temporary storage of the electric panel, before final installation it is necessary to take some precautions so as not to damage the external
structure and internal electric and electronic devices.
Store the electric panel packed in a closed, covered place.
Position it in a stable manner with no risk of it accidentally falling.
- Position the electric panel in a place protected against atmospheric agents with a humidity level between 30 and 75% and a temperature between
-30°C and +80°C with short times not exceeding 24 hours, up to +70°C.
- Stack the electric panels without stacking too many one on top of another.
1.9- Transporting
Transportation of the electric panel must be done so as not to jeopardize its structure.
On receiving the panel, inspect it for any damage suffered in transit and that the data given on the rating plate correspond to what you requested. Any
damage must be reported in writing to the carrier directly when the goods are received. Compensation for damage will be paid in accordance with
current legislation on carriage.
In the event of damage due to transportation or delivery of the wrong model, please inform immediately the supplier.
Before removing the packing from the electric panel, carefully read the user warnings given in this handbook.
All the packing material of the electric panel must be disposed of in accordance with current regulations.
1.10- Getting rid
After use or in the case of demolition, the electrical panel must be disposed of according to the legislative provisions in force in the country it is destined
for.
CAUTION ! in addiction, it is wise to destroy the plate identification of the electrical panel and any other documents.
1.11 - Assistance center
All maintenance work and technical service must be performed by “ Specialized personnel ” authorized by “ the supplier ” who will arrange for a
technician to step in after the customer’s call.