EAS15-806-GB.doc
EAS 15 - 806
REV.1-07/11
1 – GENERAL WARNING AND MANUAL USE
The Instruction for Use are integral part of the machine and must accompany it for all its useful life until its demolition.
For every operation one must always apply to what is prescribed in the Instructions.
Follow scrupulously all indication reported in the Instructions
Prevent from making use of the machine operators not knowing the prescription based on the Instructions
Keep complete and legible Instructions in a place accessible to operators.
Hand over the manual to any other user or successive owner of the machine.
The Firm will not think he is responsible for difficulties, breaks, accidents etc. due to the no knowledge or at any rate to the no application of the rules
held in this manual.
The same is told for the execution of changes and variants or for the installation of accessory not previously authorized.
1.1 - Introduction
Dear Customer,
We would like to thank you for your attention and for purchasing a high-quality “Electric Panel.”
Our Technical Service and Spare Parts departments will do their utmost to help you should you need it.
To this regard, for all control and overhaul operations, please call the producer who will provide you with specialized, prompt action.
If you have had parts replaced, ask and make sure that only genuine spare parts are used in order to assure you that the initial performance and safety
required by current standards are restored.
Use of
non-genuine spare parts shall immediately forfeit all right to warranty
and Technical Service.
The special composition and design of this panel enables satisfying the most restrictive operator safety standards.
To use “
Electric Panels
” in the best way, below we give the most important rules to be followed.
1.2 - General warning
- This manual has been drawn up for the
USER
, the
MAINTENANCE TECHNICIAN
, the
REPAIRS TECHNICIAN
.
- Read this manual carefully since it server as a guide to the way the electric control board is designed to be used, to its technical features, to supply
the instructions for installation, assembly, regulation and use. It is also useful for personnel training, to indicate the maintenance operations, for
ordering spare parts and to give indications of the outstanding hazards.
- The instruction manual should be considered as part of the equipment and must be "
KEPT FOR FUTURE REFERENCE
" as long as the equipment is
assembled.
- The manual must always be available for consultation near the electric control board and kept in a suitable manner (in protected, dry places, away
from direct sunlight, etc.).
- It should be borne in mind that some diagrams it contains have only the purpose of identifying the parts described and therefore might not correspond
to your electric panel.
- After opening the package, check the entire unit in case of problems with this unit do not use it until you have consulted an the
Retailer or
Manufacturer
otherwise all warranty rights will be voided.
- This electric panel has only to be used for the purpose for which it was specifically designed. Any other use shall be considered improper and,
therefore, dangerous.
- Our products are made in conformity with current safety standards so it is recommended to use all these devices and take care that their use causes
no injury or damage.
- All operations concerning the installation of the control panel should be carried out by skilled personnel in conformity with present regulations.
- During work it is recommended to keep to the current personal safety rules in force in the country the product is destined for (clothing, work tools,
etc.).
- When the unit is working do not use the electric control board parts.
- Never for any reason modify any part of the electric panel (connections, holes, electrical or mechanical devices, etc.) unless after receiving written
authorization by the producer; the responsibility deriving from any such action shall fall on the person doing it since he then in fact becomes its
manufacturer.
Summary of Contents for EAS 15-806
Page 27: ......