Mosa CP1000iL, Owner'S Manual, Page: 34 / 43

‐ 33 ‐
(1). Open the connector cap 6 on the battery connector 4, and connect
the battery connector 4 securely together with the power station
connector 5.
(2) As shown in the figure above, put the battery connector 4 and
power station connector 5 into the right position in the casing 7, and
arrange all exposed connectors, wiring harness and other parts into the
casing 7 to ensure that it will not affect closing the upper cover 1.
(3). Close the upper cover 1, make sure that the wiring harness,
connectors and other parts will not be clamped between the upper
cover 1 and the casing 7, then press the upper cover 1, tighten all
buckle 2, and finally tighten the two screws 3.
NOTE
Before using for the first time, please charge the power station fully
from AC charging for at least 10 hours to
calibrate the capacity of
the new battery.
There is high-voltage power inside the power station. Do not start
the power station when the upper cover is opened, to prevent
accidental electrical shock!
6. TRANSPORTATION AND STORAGE
 Make sure turn OFF the main switch before transportation or
storage.
 Disconnect the battery connector before long-distance
transport or long-term storage.
 Before using for the first time, or after long-term storage,
please charge the power station fully from AC charging for at
least 10 hours to
calibrate the capacity of the battery connected