Mosa CP1000iL, Owner'S Manual, Page: 13 / 43

‐ 12 ‐
1.4 BATTERY CONNECTOR
You need to connect the battery connector 2 before charging or
using the power station:
(1). Unscrew the two screws between the upper cover 1 and casing 4,
loosen all buckle 5, and then open the upper cover 1.
(2). Open the connector cap on the battery connector 2, connect the
battery connector 2 and power station connector 3 closely together,
otherwise the power station cannot be charged or used.
(3) As shown in the figure above, put the battery connector 2 and power
station connector 3 into the right position in the casing 4, and arrange all
exposed connectors, wiring harness and other parts into the casing 4 to
ensure that it will not affect closing the upper cover 1.
(4). Close the upper cover 1, make sure that the wiring harness,
connectors and other parts will not be clamped between the upper cover
1 and casing 4, then press the upper cover 1, tighten all buckle 5, and
finally tighten the two screws.
1
2
3
4
4
1
5
Two screws
5