MOSA Weld TS 400 YS, Use And Maintenance Manual

Page: 9 / 44

13/1
1/14 M2-5 (TS)_EN
ENGLISH
ENGLISH
M
2.5.1
SAFETY PRECAUTIONS DURING INSTALLATION AND USE
Do not instal equipments closed to heat source, to explosion
or fire risk area.
10°
10°
= 20° max
10°
10°
= 20° max
Always locate the machine on a flat and solid ground, so as to
avoid tipping, slipping or falling during operation. Avoid using
the machine on slopes greater than 10 degrees.
1,5 m
1,5 m
1,5
m
GAS
DI SCARIC
O
Make sure the area immediately surrounding the machine is
clean and free from debris
Do not place objects or obstructions in the vicinity of the air
intakes and air outlets, a possible overheating of the generator
could cause a fire.
Connect the machine to an earthing system according to the
regulations in force at the place of installation.
Use the ground terminal on the front of the machine.
Do not use the machine with wet or damp hands and / or
clothing.
Use plugs suitable for the output sockets of the machine and
make sure that electrical cords are in good condition.
The machine must always be positioned so that the exhaust
gases are dispersed in the air without being inhaled by people
or living beings.
If you use the machine indoors is necessary that the installa-
tion is designed and built by skilled technicians in a workmanli-
ke manner.
During normal operation, keep doors closed. The access to
the internal parts should be allowed only for maintenance re-
asons.
Keep area near to the muffler free from objects such as rags,
paper, cardboard. The high temperature of the muffler could
cause the burning of objects and cause fire
Immediately stop the machine in case of malfunction.
Do not restart the machine without first having found and fixed
the problem.
SAFETY RULES
ENGINE DRIVEN WELDERS
EXHAUST
OUTPUT
REV
.0-01/18
9