9
CHECK FOR SPILLAGE
CHECK FOR SPILLAGE
CHECK FOR SPILLAGE
CHECK FOR SPILLAGE
CHECK FOR SPILLAGE
A spillage check must be made befor
A spillage check must be made befor
A spillage check must be made befor
A spillage check must be made befor
A spillage check must be made before leaving the installed appliance
e leaving the installed appliance
e leaving the installed appliance
e leaving the installed appliance
e leaving the installed appliance
with the customer
with the customer
with the customer
with the customer
with the customer. Make this with all the ceramic coals in position.
. Make this with all the ceramic coals in position.
. Make this with all the ceramic coals in position.
. Make this with all the ceramic coals in position.
. Make this with all the ceramic coals in position.
1.
Close all doors and windows in the room containing the appliance.
2.
Light the appliance and turn the flame-height control to the maximum
position.
3.
Leave the appliance on for 5 minutes.
4.
Hold a lighted smoke match close to the draught diverter outlet at the
back of the stove. See figure 10.
5.
The installation is satisfactory if the smoke is drawn into the appliance.
6.
If the smoke is not drawn into the appliance, leave the appliance alight
at the maximum setting for a further ten minutes and then repeat the
test.
7.
If the smoke is still not drawn into the appliance, turn off the appliance
and allow to cool. Check the flue installation and clearance of the draught
diverter from the rear surface. If no solution can be found, tur
If no solution can be found, tur
If no solution can be found, tur
If no solution can be found, tur
If no solution can be found, turn of
n of
n of
n of
n offffff
the appliance and disconnect it. Advise the customer of the pr
the appliance and disconnect it. Advise the customer of the pr
the appliance and disconnect it. Advise the customer of the pr
the appliance and disconnect it. Advise the customer of the pr
the appliance and disconnect it. Advise the customer of the problem
oblem
oblem
oblem
oblem
and str
and str
and str
and str
and stress that the appliance must not be used until the pr
ess that the appliance must not be used until the pr
ess that the appliance must not be used until the pr
ess that the appliance must not be used until the pr
ess that the appliance must not be used until the problem is
oblem is
oblem is
oblem is
oblem is
solved
solved
solved
solved
solved. If necessary seek expert advice.
8.
If the above test is satisfactory, open all internal connecting doors,
hatches, etc. in the room. Keep all doors and windows that open to the
outside of the building closed. Switch on any extractor fan installed in
the same room as the appliance or a connecting room. Open all doors
and other openings between the fan and the appliance. Recheck for
spillage as above. The installation is satisfactory if the smoke is drawn
into the appliance. If the test is not satisfactory
If the test is not satisfactory
If the test is not satisfactory
If the test is not satisfactory
If the test is not satisfactory,,,,, tur
ur
ur
ur
urn of
n of
n of
n of
n off the appliance
f the appliance
f the appliance
f the appliance
f the appliance
and disconnect it. Advise the customer of the pr
and disconnect it. Advise the customer of the pr
and disconnect it. Advise the customer of the pr
and disconnect it. Advise the customer of the pr
and disconnect it. Advise the customer of the problem and str
oblem and str
oblem and str
oblem and str
oblem and stress
ess
ess
ess
ess
that the appliance must not be used until the pr
that the appliance must not be used until the pr
that the appliance must not be used until the pr
that the appliance must not be used until the pr
that the appliance must not be used until the problem is solved.
oblem is solved.
oblem is solved.
oblem is solved.
oblem is solved.