Morso 553 Installation Instructions Manual Download Page 10

10

Explain to the customer that the appliance has a flame failure & spillage
monitoring system. Point out the explanation of this system shown in
the user’s instructions under “Operating the fire”. Advise that if the fire
goes out for any reason wait at least three minutes before relighting.
Stress that if the monitoring system repeatedly shuts off the fire, the
appliance should be switched off and a specialist should be consulted.

Advise the customer that the windows can be opened for cleaning the
interior by using the special key supplied. Str

 Str

 Str

 Str

 Stress that the window

ess that the window

ess that the window

ess that the window

ess that the window

locking scr

locking scr

locking scr

locking scr

locking screw should be r

ew should be r

ew should be r

ew should be r

ew should be refitted afterwar

efitted afterwar

efitted afterwar

efitted afterwar

efitted afterwards to pr

ds to pr

ds to pr

ds to pr

ds to prevent inadvertent

event inadvertent

event inadvertent

event inadvertent

event inadvertent

opening when the stove is alight.

opening when the stove is alight.

opening when the stove is alight.

opening when the stove is alight.

opening when the stove is alight.

Str

Str

Str

Str

Stress

ess

ess

ess

ess  that no

that no

that no

that no

that no extra coals must be added over and above those

extra coals must be added over and above those

extra coals must be added over and above those

extra coals must be added over and above those

extra coals must be added over and above those

supplied with the appliance and that any r

supplied with the appliance and that any r

supplied with the appliance and that any r

supplied with the appliance and that any r

supplied with the appliance and that any replacements must only

eplacements must only

eplacements must only

eplacements must only

eplacements must only

be the authorised spar

be the authorised spar

be the authorised spar

be the authorised spar

be the authorised spares. W

es. W

es. W

es. W

es. War

ar

ar

ar

arn that ignoring this advice could cause

n that ignoring this advice could cause

n that ignoring this advice could cause

n that ignoring this advice could cause

n that ignoring this advice could cause

incomplete clearance of the pr

incomplete clearance of the pr

incomplete clearance of the pr

incomplete clearance of the pr

incomplete clearance of the products of combustion with

oducts of combustion with

oducts of combustion with

oducts of combustion with

oducts of combustion with

consequent health hazar

consequent health hazar

consequent health hazar

consequent health hazar

consequent health hazards.

ds.

ds.

ds.

ds.

Advise the customer that the top, front, sides and back of the appliance
are working surfaces and become very hot during use and, therefore
care should be exercised, particularly with the young, elderly or infirm.

FINAL REVIEW & CUSTOMER BRIEFING

FINAL REVIEW & CUSTOMER BRIEFING

FINAL REVIEW & CUSTOMER BRIEFING

FINAL REVIEW & CUSTOMER BRIEFING

FINAL REVIEW & CUSTOMER BRIEFING

Visually inspect the stove. Clean off any marks incurred during installation.

Advise the customer how to operate the appliance. Advise the customer
that they should read their Owner’s guide before operating the fire and
always follow the advice in the section headed “Cleaning”.

Figur

Figur

Figur

Figur

Figure 10

e 10

e 10

e 10

e 10

Summary of Contents for 553













Reviews: