Morso 553 Installation Instructions Manual Download Page 2

2

As supplied, this stove is for use with natural gas (G20)
When converted using conversion kit no. 555311 this appliance is for
use with propane gas (G31)
This appliance is for use in the United Kingdom (GB) and the Republic
of Ireland (IE) only.

LIST OF COMPONENTS

LIST OF COMPONENTS

LIST OF COMPONENTS

LIST OF COMPONENTS

LIST OF COMPONENTS

Cast iron stove containing  gas burner unit & interior flueway
1 Door handle with fixing screw
1 Ceramic rear base piece
1 Pair of ceramic front base pieces
1 Set of 3 top coals
1 Pair of ceramic firebox side walls
1 8mm nut & olive
1 Key for window
1 Set of Installation and user’s instructions
1 Flue sealing rope

APPLIANCE DA

APPLIANCE DA

APPLIANCE DA

APPLIANCE DA

APPLIANCE DAT

T

T

T

TA

A

A

A

A

This product uses fuel effect pieces, firebox side walls and gaskets containing
Refractory Ceramic Fibres (RCF), which are man-made vitreous silicate fibres.
Excessive exposure to these materials may cause temporary irritation to eyes,
skin and respiratory tract. Consequently, it makes sense to take care when
handling these articles to ensure that the release of dust is kept to a minimum.
To ensure that the release of fibres from these RCF articles is kept to a minimum,
during installation and servicing we recommend that you use a HEPA filtered
vacuum to remove any dust and soot accumulated in and around the stove
before and after working on the stove. When replacing these articles we
recommend that the replaced items are not broken up, but are sealed within
a heavy duty polythene bag, clearly labelled as RCF waste. This is not classified
as “hazardous waste” and may be disposed of at a tipping site licensed for
the disposal of industrial waste. Protective clothing is not required when
handling these articles, but we recommend you follow the normal hygiene
rules of not smoking, eating or drinking in the work area and always wash
your hands before eating or drinking.
This appliance does not contain any component manufactured from asbestos
or asbestos related products.

Summary of Contents for 553













Reviews: