manualshive.com logo in svg

Morris PROAG 16K PLUS, Operator'S Manual, Page: 92 / 190

Share
Download
Morris PROAG 16K PLUS Operator'S Manual Download Page 92

Maintenance

6-2 

October 2019 

16K PLUS

General

This section deals with two goals, maximum life and 
dependable operation.  Adopt a regular maintenance 

and lubrication program.  Care and sufficient lubrication 

is the best insurance against delays.

Safety

•  Always shut off the tractor and remove key before 

dismounting.

•  Guard against hydraulic high pressure leaks with 

hand and face protection.

•  Never work under the implement unless it is in the 

down position or securely blocked in place.  Do not 
depend on the hydraulic system to support the frame.

 Warning

Securely support any machine elements that 
must be raised for service work.

 Caution

Keep service area clean 
and dry.  Wet or oily 

floors are slippery.  

CAUTION

BE ALERT

SAFETY FIRST

REFER TO SECTION 1 AND REVIEW

ALL SAFETY RECOMMENDATIONS.

DANGER

11549

Mechanism on Stacker

May Move Automatically

Without Warning

TO AVOID INJURY OR DEATH

• Stop all controls and engine, remove ignition key.

• Turn electrical power off on control box.

• Secure the position of all mechanisms before
  servicing or adjusting.

Summary of Contents for PROAG 16K PLUS































































































































































































Reviews:

No comments