Morris C2 Contour, Operator'S Manual

Page: 6 / 92

Safety
1-2 August 2014 C2 Contour Air Drill
Watch for this symbol. It identifies potential hazards
to health or personal safety. It means:
ATTENTION - BE ALERT.
Your Safety is involved.
Familiarize yourself with the location of all decals. Read them
carefully to understand the safe operation of your machine.
SAFETY-ALERT
SYMBOL
Three words are used in conjunction with the safety-alert symbol:
Signal Words
The words DANGER, WARNING or CAUTION are used
with the safety alert symbol. Learn to recognize the
safety alerts, and follow the recommended precautions
and safe practices.
Replace any
DANGER, WARNING, CAUTION
or
instructional decal that is not readable or is missing. The
location and part number of these decals is identified
later in this section of the manual.
The words
Important
and
Note
are not related
to personal safety but are used to give additional
information and tips for operating or servicing this
equipment.
IMPORTANT: Identifies special instructions or
procedures which, if not strictly
observed could result in damage to, or
destruction of the machine, process or
its surroundings.
NOTE:
Indicates points of particular interest for more
efficient and convenient repair or operation.
Indicates an imminently hazardous situation that, if not
avoided, will result in DEATH OR SERIOUS INJURY.
DANGER
Indicates a potentially hazardous situation that, if not
avoided, could result in DEATH OR SERIOUS INJURY.
WARNING
Indicates a potentially hazardous situation that, if not
avoided, may result in MINOR OR MODERATE INJURY.
CAUTION