Assembly
Your Pod vacuum cleaner has an
efficient suction action to provide high
levels of cleaning on all types of surface
around the home.
Switch off before fitting or removing
accessories.
Insert the flexible hose
Insert the flexible hose
Á
in the hose
inlet duct
·
on the front of the product,
press until it clicks into position.
B
To remove the flexible hose
Press the release button to release the
flexible hose. Pull the hose firmly from the
hose inlet duct.
Fitting the extension tubes and
accessories
Join the two extension tubes
Î
together and attach the extension tubes to
the handle end
Á
of the hose.
A
Some
tasks may be easier with only one extension
tube fitted.
Attach the floor nozzle
Ê
to the
extension tubes. The floor nozzle can be
used for carpets, rugs, hard floors and tiles.
Other accessories include:
• Crevice tool
È
for awkward places,
corners and behind radiators etc.
• Brush attachment
Í
for pelmets,
delicate objects etc.
• Upholstery nozzle
Ë
for sofas,
armchairs etc.
• Tools can be stored on the tool storage
clip
Ï
that fits onto the extension tubes.
Controls
On/off control
Press the on/off pedal to start the
machine, press again to turn off.
Variable power control
Turn the dial clockwise to increase the
power for maximum suction or anti-
clockwise to reduce suction when cleaning
delicate surfaces such as curtains etc.
IMPORTANT: If suction power appears
to be low check that the variable power dial
is set to maximum.
Suction control on the handle
The suction power can be adjusted
using the fingertip control on the handle.
C
Closed : full suction
Open :
low suction
4
Release button
B
C
73190 Rev 1 28/4/04 6:23 PM Page 4
