Thank you for buying your new intense body massage
centre from Morphy Richards. Please read these
instructions carefully before use and keep in a safe
place for future reference.
Key features
1
Massage surface
2
Heat slide switch
3
Massage slide switch
4
Magnetic infra-red lens
Features
•
Energises and revitalises tired, worn muscles.
•
Allows gentle or powerful massage.
•
Ideal before and after sports activities.
•
Offers relief from minor aches and pains.
•
Magnetic infra red lens improves blood circulation
and aids massage results.
•
Heat and vibrating massage can be used
independently or at the same time.
•
Your body massager gives you soothing relief after
a busy day of work.
1
2
4
3
For foot massage
Before connecting to the power source, be sure both
switches are in the off position.
1
Wash your feet and dry thoroughly. Do not apply
any oils or creams.
2
Position the massager on a firm level floor, close
to an electrical socket.
3
Place a chair in front of the massager.
4
Plug the mains lead into the electrical socket.
5
Sit down on a chair. Do not stand on the
massager as this will damage it.
6
Place your feet on the massager, heels by the
switches.
7
The massage switch can be used on setting one
for a gentle massage or position 2 for a powerful
massage.
8
The heat switch has two heat settings that can be
used to suit your requirements. The heat switch
can be used independently or together with the
massage switch.
Switch the massager to the off position after treatment.
Your skin may become slightly red and warm after
treatment (which indicates that the blood circulation
has been stimulated). This is quite normal after any
massage treatment and the symptoms will quickly
disappear. You may wish to apply a soothing lotion.
For back massage
Before connecting to the power source, be sure both
switches are in the off position.
1
Place the massager on a firm chair vertically, close
to an electrical socket.
2
Lean the massager against the back of the chair or
adjust the length of the adjustable feet so that the
massager can be hung over the back rest.
3
Plug the mains lead into the electrical socket and
switch on.
4
Sit down on a chair in front of the massager.
5
Lean on the massager gently and adjust the length
of the front feet until you feel comfortable.
6
The massage switch can be used on setting one
for a gentle massage or position 2 for a powerful
massage.
7
The heat switch has two heat settings that can be
used to suit your requirements. The heat switch
can be used independently or together with the
massage switch.
Maintenance and cleaning
Always unplug the unit from the mains socket before
cleaning. Never use liquids or abrasive cleaners to
clean the unit. Just wipe with a damp cloth.
Unplug the appliance and store your massager box
provided, in a dry place.
Wiring
This product is fitted with a 13A (BS1363) plug.
A 3 amp fuse (BS1362) must be used.
Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating Current).
If the socket outlets in your home are not suitable for
the plug supplied with this appliance the plug should be
removed and the appropriate one fitted.
IMPORTANT : THE PLUG REMOVED FROM THE
MAINS LEAD, IF SEVERED, MUST BE DESTROYED
AS A PLUG WITH BARED FLEXIBLE CORD IS
HAZARDOUS IF ENGAGED INTO A LIVE SOCKET
OUTLET.
Mains lead
As a safety precaution and to prolong the life of your
appliance, do not wrap the mains lead around the
appliance as this will cause damage.
Adjustment of massage centre
For increased comfort, the front feet of the massage
centre can be adjusted. They can be unscrewed a
maximum of 7 turns, to raise the front of the massager.
You will hear a ‘click’ at the end of each turn. Do not try
to unscrew the feet more than 7 turns, as this may
damage the massage centre.
If the massage produces any type of discomfort cease
the treatment.
Recommended massage times
1
Massage may be applied once or twice daily.
2
Do not massage the same area for more
than 15 minutes.
