Morphy Richards 47507, Manual

Page: 4 / 20

4
www.morphyrichards.com
• Do not place the glass jug on the
hot plate unless the lid is in
position.
• Do not lift the coffee maker by
gripping the water reservoir. Hold
the body of the coffee maker.
Electrical requirements
Check that the voltage on the rating
plate of your appliance corresponds
with your house electricity supply
which must be A.C. (alternating
current).
If the socket outlets in your home
are not suitable for the plug supplied
with this appliance the plug should
be removed and the appropriate
one fitted.
WARNING : The plug removed
from the mains lead, if severed,
must be destroyed as a plug
with a bared flexible cord is
hazardous if engaged into a live
socket outlet.
WARNING: This appliance must
be earthed.
Features
A
⁄ 1.7L removable water reservoir
¤ Power light
‹ Hot water/steam selector switch
› On/off switch
fi Brewing head
fl Filter lock
‡ Filter holder
· Drip tray water level indicator
‚ Non slip rubber feet
„ 1 cup filter
‰ 2 cup filter
 Hard pod filter
Ê Measuring spoon
Á Compactor
Ë Removable drip tray
È Froth attachment
Í Steam nozzle
Î Coffee or steam lever
Ï Display
Ì Warming plate
Before first use
1 Remove all the packaging and retain
for future reference.
2 Before using your coffee maker for
the first time or if you have not used
it for some time, it is important to
rinse the coffee maker by running
water through. Follow the procedure
for making espresso coffee, without
coffee in the filter holder.
Display symbols
B1 Flashing: warming up
B2 Ready to make coffee
or making coffee (lever down)
B3 Flashing: Warming up to make
steam or hot water
B4 Ready to make steam
or making steam (lever up)
B5 Ready to make hot water
(lever up)
MAKING ESPRESSO
COFFEE
Filling the water reservoir
1 Remove the water reservoir by
sliding the water tank upwards
using the handle
C . Open the lid of
the water reservoir ⁄ by pulling up
and sliding backwards.
2 Fill the water reservoir using cold
tap water, 1.7 litres maximum
D .
IMPORTANT: Do not overfill or carry
with the handle when full.
3 Replace the water reservoir by
sliding it back into place
E .
Using with ground coffee
Ensure the coffee/steam lever Î is
in the off position.
1 Plug the coffee maker into the
power outlet.
2 Switch the coffee maker on by
pressing the on/off switch
› . The
blue power light ¤ and the display
Ï will illuminate.
3 Pre-heat your coffee cups by
placing them upside down on the
warming plate
Ì .
• This coffee maker is designed for
use with espresso or cappuccino
cups only. The coffee will be much
weaker if larger cups are used.
47507MCZ-Rev1-PumpEspresso 25/9/06 4:20 pm Page 4