background image

4

FEATURES

Lid with finger pad

¤

Spout filter

Concealed element

360° connector

Cordless base unit

Cord storage

On/off switch

·

Water level indicator x 2
with illuminating light

Lid release button

BEFORE FIRST
USE

Before using the appliance
for the first time, fill with
water, boil and pour away.

OPERATING THE 
APPLIANCE

1

Wherever possible fill
through the spout, as this
helps to free the filter from
limescale build-up.

The integrated water level
indicators allow you to
easily see the amount of
water in the kettle.

Always ensure that the
appliance is filled till the
water is visible through the
level indicator.

Boil only as much water as
you need as this saves
electricity.

2

Place the appliance on the
base unit, ensuring the
appliance locates on to the
360° connector.

The 360

°

connector allows

the appliance to be located
at any position - ideal for
left and right handed users
and convenient positioning
on worktop.

3

Plug in and switch on at
the wall socket.

4

Switch the appliance on.
The  water level indicator
will light up.

5

When the water boils the
appliance will switch off
automatically.

If you are using the
appliance for the first time,
pour away the boiled water
and refill.

6

Lift the appliance from the
base unit by the handle
ensuring you hold the
appliance level. 

To re-boil, switch to ON
again. If the appliance has
just switched off wait a
minute or so before
switching it back on again.

If you do not put in enough
water, or switch on the
appliance when it is empty,
the safety cut-out will
switch off the power
automatically. If this
happens, refill and wait a
few minutes for the element
to cool, then use as
normal.

Filter removal 

1

Open the lid.

2

Lift the filter upwards from
its location using the tab
provided.

3

To refit the filter, slot it into
the side wall guides and
press down firmly. Ensure
the filter is correctly located
into the central guide. 

WARNING: Make sure
that the filter is put in
correctly otherwise the
lid will not close.

UK Helpline      0844 871 0954      

Replacement parts 0844 873 0720

Ireland 1800 409 119 

43326 rev4:43326 rev3  21/10/2009  13:56  Page 6

Summary of Contents for 43173 BLACK ACCENTS JUG KETTLE







Reviews: