Morita Lubrina 2, Instructions For Use Manual, Page: 33 / 48

31
8.3 Parts Replacement
Instructions for Use 2019-01-16
8.3.2 Oil Absorbent Pad
Pull out the oil collection tray from the bottom of the device.
Remove the used oil absorbent pad and replace it with a new one.
p. 19 “6.5 Oil Collection Tray and Oil Absorbent Pad”
p. 36 “10.3 Consumables”
* Replace the parts as necessary depending on degree of wear and length of use.
* Order parts from your local dealer or J. MORITA OFFICE.
8.3.3 Door Oil Absorbent Sheet
Remove the door oil absorbent sheet from the front door sheet stopper
and replace the sheet with a new one.
p. 20 “6.6 Door Oil Absorbent Sheet and Front Door Sheet Stopper”
• Dispose of used oil absorbent pads according to regulations for medical waste.
• Do not use a pad with excessive oil absorption. Doing so could cause more oil mist to
come out from the device and spray into your eyes.
• Dispose of used door oil absorbent sheets according to regulations for medical waste.
8.3 Parts Replacement
8.3.1 Oil Absorbent Sheet
Remove the used oil absorbent sheet and replace it with a new one.
Check that the sheet orientation is correct.
* A single sheet can absorb approximately one can of the MORITA MULTI SPRAY.
p. 19 “6.4 Oil Absorbent Sheet”
• Dispose of used oil absorbent sheets according to regulations for medical waste.
Always check the absorbed amount when performing the daily maintenance. Use of a
sheet with excessive absorption could result in oil overflowing from the device.
Always check the absorbed amount when performing the daily maintenance. Use of a
sheet with excessive oil absorption could result in oil overflowing from the device.