Operator Manual
DigiBook 150
51
Rev. 1.00-C
Selecting the left icon you will produce book with cover, selecting the right icon you will
produce book block. In this case too the icon on the main window will change to indicate
the typology of work you are doing. When you select the right icon, you make the nipping
station off.
13. The number above the clamp indicates the value you have set up at point 2.
14. The indicator “thermometer” above the glue station group is red until when the pre-melter
and the nozzle have reached the working temperature and the temperature inside is stabi-
lized by a timer. When everything is stabilized the indicator “thermometer” is green. Until
when he indicator “thermometer” is red, it is not possible to make glue and cleaner cycle.
15. Indicators for sensors,
first box is green if the carriage preset sensor is on
second box is green if the “closed clamp” sensor is on when you have the carriage in
the initial position
third box is green if the “closed clamp” sensor is on when the carriage is on the nip-
ping station
fourth box is green if the nipping station is down
fifth box is green if the nipping station is up
16. See above at point 15.
first ring glows green if the preset sensor is energized
second ring glows green if the sensor for closed clamp is energized
third ring glows green if the sensor for closed clamp with carriage on the press is en-
ergized
fourth ring glows green if the sensor for press in position “bottom” is energized
fifth ring glows green if the sensor for press in position “up” is energized
sixth ring glows green if the sensor for cover presence is energized