Operator Manual
DigiBook 150
45
Rev. 1.00-C
2. Icon button for carriage parameters. Once the icon is pressed, the window below will appear
The value in the red box can be modified from -10mm to +10mm. This moves forward (pos-
itive sign) or backward (negative sign) the carriage (and consequently the book on the cov-
er) during the cycle. As a result the cover can stick out or stick in from the book.
Pressing on the hand in green box, you access to windows for manual movements for the
carriage (see below).
In order to make forward and backward movements or carriage preset, it is necessary to se-
lect the direction (below the selection made a green checkmark will appear) and press to-
gether the two buttons on the front part of the machine until the desired position. The num-
ber below the clamp indicates the current position for the carriage.
3. Icon, milling station button. Once the icon is pressed, the window below will appear.
Here you can decide if you want to run the milling station or not during the cycle (if the,
milling disk option is present, is not possible disable it). The checkmark moves to indicate
the selection you have made. The central icon activates the manual vacuum. When the mill-
ing station is off, on the main window the selection is indicated by a red icon (see the image
below).
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
